Difference between revisions of "E-01 USB flashing tool"
(How to use the USB flash tool (init)) |
(→Entering the Bootloader Mode: light copyediting) |
||
Line 10: | Line 10: | ||
== Entering the Bootloader Mode == | == Entering the Bootloader Mode == | ||
[[File:ESP8266 E-01 USB flash tool (bottom).jpg|thumbnail|Bootloader button on the bottom side of the USB flash tool]] | [[File:ESP8266 E-01 USB flash tool (bottom).jpg|thumbnail|Bootloader button on the bottom side of the USB flash tool]] | ||
− | In order for the E-01 module to enter the bootloader mode, the button on the bottom side of the module needs to be | + | In order for the E-01 module to enter the bootloader mode, the button on the bottom side of the module needs to be pushed '''''while being inserted''''' into the USB port. |
[[File:ESP8266 E-01 on USB flash tool.jpg|thumbnail|The E-01 module must be inserted so that the PCB of the E-01 module sits over the PCB of the flash tool.]] | [[File:ESP8266 E-01 on USB flash tool.jpg|thumbnail|The E-01 module must be inserted so that the PCB of the E-01 module sits over the PCB of the flash tool.]] | ||
− | Once the E-01 module has entered the bootloader mode, only the red power LED | + | |
+ | Once the E-01 module has entered the bootloader mode, only the red power LED lights. The blue LED flickers once while inserting into the USB and remains off until the flashing process starts. |
Latest revision as of 21:47, 30 December 2016
The E-01 module is not very breadboard friendly. So we have a special E-01 USB flashing tool at the commons|lab. The module can be used to flash the E-01 with the ESPtool program or directly from the Arduino IDE.
Be careful to use the correct polarity! Insert the E-01 module according to the illustration on the right. The E-01 module must not stick out, but must sit entirely on top of the flash tool.
Entering the Bootloader Mode
In order for the E-01 module to enter the bootloader mode, the button on the bottom side of the module needs to be pushed while being inserted into the USB port.
Once the E-01 module has entered the bootloader mode, only the red power LED lights. The blue LED flickers once while inserting into the USB and remains off until the flashing process starts.